FOR A PROPER MOTOR OF THIS WEBSITE, WE MAKE USE OF COOKIES.
IMPCO Accessories such as Gas hose & Pipe - Adapters - Filters - Electro parts - Shut Off Valves for IMPCO Systems
Subcategories
IMPCO Hose & Pipe - Gas Hose - Water Hose - Petrol Hose - LPG Pipe
IMPCO Adapters for Mixers in different connection diameters - Arm extensions - Extension rings
IMPCO Couplings for Evaporators - Mixers - Gas valves - Gas hose - Water hose
IMPCO Filters - Air Filters and Plate - LPG Gas Filters
Electrical Parts such as Gas Valves - Gasoline Valves - Switches - Safety Relays - Solenoid Valves
As a water connection to IMPCO evaporators such as the Model E or Cobra Brand: IMPCOType number: F4-17Material: PlasticOutput connection: 3/8" NPT Male (±16mm)Input connection: Ø16mm Hose barb
To connect an 8mm copper LPG pipe (in combination with a compression fitting) to an inlet / outlet of an evaporator or gas valve with 1/4" NPT thread. Inner diameter: Ø6mmOutput Connection: 5/16"UNF - 1/2"-20 SAE 45°Flare Male (12.5mm)Input connection: 1/4" NPT Male (±13mm)Spanner size: 14mmMaterial: Brass
A direct connection between gas valve (Valtek Type 06) and an IMPCO Evaporator. Inlet / outlet of evaporator and gas valve with 1/4" NPTF thread. Inner diameter: Ø8mmOutput connection: 1/4" NPT Male (±13mm)Input connection: 1/4" NPT Male (±13mm)Spanner size: 14mmMaterial: Brass
A connection between gas valve (Valtek Type 06) and an IMPCO Evaporator. Inlet / outlet of evaporator and gas valve with 1/4" NPTF thread. Inner diameter: Ø8mmOutput connection: 1/4" NPT Male (±13mm)Input connection: 1/4" NPT Male (±13mm)Spanner size: 14mmMaterial: Brass
To connect an 8mm copper LPG pipe (in combination with a compression fitting) to an inlet / outlet of an evaporator or gas valve with 1/4" NPT thread. Inner diameter: Ø6mmOutput Connection: 5/16"UNF - 1/2"-20 SAE 45°Flare Male (12.5mm)Input connection: 1/4" NPT Male (±13mm)Spanner size: 14mmMaterial: Brass
Used for gas connection to IMPCO evaporators such as the Model E on the Mixer 425.Brand: IMPCOType number: F4-1Material: PlasticOutput Connection: 1" NPT MaleInput Connection: Ø1" (25.5mm) Barb
Use this adapter (mounting ring) if you want to mount an IMPCO "arm" on a carburetor (4-barrel) with a connection diameter of Ø130 mm for placing a 300A mixer next to the carburetor. Type: IMPCO A1-61Dimensions: ID Ø130 mm x Height: 25 mm, outer diameter: Ø145 mmWeight: 0.2kgMounting: On a carburetor with connection diameter 130 mm. Material: Aluminium
Use this adapter if you want to mount an IMPCO "arm" on a carburetor with a connection diameter of Ø78 mm for placing a 300A mixer next to the carburetor. Type: IMPCO A1-54Dimensions: ID Ø78 mm x Height: 16 mm, outer diameter: Ø145 mmWeight: 0.2kgMounting: On a carburetor with connection diameter 78 mm.Position: On top of the carburetorMaterial: Aluminium
Use this adapter if you want to extend an IMPCO "arm" and give it a downward angle. For placing a 300A mixer next to the carburetor. To be used in combination with the other IMPCO Arm parts. Type: IMPCO A1-59 (911106)Approval Number: N/ADimensions: Width: 122 mm x Length: ±35 mmWeight: 0.2kgMaterial: Aluminium
Air filter with an outer diameter of 25 cm, aluminum grille and rubber seal. Used in combination with the air filter cover type C1-4 on IMPCO Mixers model 300A (CA300AM-1 and CA300AM-50-2) Brand: IMPCOType: IMPCO Air Filter F1-1Dimensions: Ø 25 cm, Height 7 cmWeight: 0.2kg
Use this adapter if you want to mount an IMPCO "arm" on a carburetor with a connection diameter of Ø67 mm for placing a 300A mixer next to the carburetor. Type: IMPCO A1-55Approval Number: N/ADimensions: ID Ø67 mm x Height: 16 mm,Outer diameter: Ø145 mmWeight: 0.2kgMounting: On a carburetor with connection diameter 67...
Use this adapter if you want to mount an IMPCO mixer type 300A on top of a carburetor with a connection diameter of Ø67 mm Type: IMPCO A1-39Approval Number: N/ADimensions: ID Ø67 mm x Height: 41 mmWeight: 0.2kgMounting: On a carburetor with connection diameter 67 mm.Position: Directly on top of the carburetorMaterial: Aluminium
Use this adapter if you want to mount an IMPCO mixer type 300A on top of a carburetor with a connection diameter of Ø67 mm Type: IMPCO A1-6Approval Number: N/ADimensions: ID Ø78 mm x Height: 36 mmWeight: 0.2kgMounting: On a carburetor with connection diameter 78 mm.Position: Directly on top of the carburetorMaterial: Aluminium
Use this adapter if you want to place an IMPCO 300A Mixer next to the carburetor using an "arm". To be used in combination with the other IMPCO Arm parts. Type: IMPCO A1-63Approval Number: N/ADimensions: Width: 122mm x Length: 200mmWeight: 0.4kgMaterial: Aluminium
For Fixing the Air Filter with an outer diameter of 25 cm on IMPCO Mixers model 300A (CA300AM-1 and CA300AM-50-2). Brand: IMPCOType: IMPCO Air Filter Cover C1-4Dimensions: diameter 25 cmWeight: 0.3 kgNote: Only suitable for IMPCO system
Use this adapter if you want to extend an IMPCO "arm" by 75 mm. For placing a 300A mixer next to the carburetor. To be used in combination with the other IMPCO Arm parts. Type: IMPCO A1-60 (910807)Approval Number: N/ADimensions: Width: 122mm x Length: 75mmWeight: 0.2kgMaterial: Aluminium
Reinforced Rubber Gas Hose with Steel Spiral Wire. Used as a gas connection between the IMPCO Model E evaporator and IMPCO type 300A or 425 mixers. Brand: IMPCOType: IMPCO Gas hoseInner Diameter: 1 InchOuter diameter: Ø35mmWeight: 0.32 kg
Use this adapter if you want to mount an IMPCO mixer of type 300A on top of a 4-barrel carburetor with a connection diameter of Ø130mm Type: IMPCO A1-16-2Approval Number: N/ADimensions: ID Ø130 mm x Height: 69 mmWeight: 0.32 kg.Material: Aluminium
Use this Hood if you want to mount an IMPCO "arm" on a carburetor for placing a 300A mixer next to the carburetor. Use a matching adapter to connect this Hood on top of the carburetor. Type: IMPCO A1-57 (910827)Approval Number: N/ADimensions: Ø145 mm x Height: 45 mmWeight: 0.4 kg Material: Aluminium
This type of gas valve is the engine vacuum is activated (opened) and also filters the LPG before it goes to the evaporator. When the engine stalls, the engine vacuum is lost and the gas shut-off valve closes automatically. Type: IMPCO VFF30 LPG FilterDimensions: Ø104 mm x Height: 119 mmEntry: 1/4" NPT (Rear)Outlet: 1/4" NPT (Top)max. Pressure: 21 bar
Overhaul your IMPCO Model E / EB Reducer with this original overhaul kit RK-E (Repair Kit). A manual is downloadable and is also included. Brand: IMPCOManufacturer code: RK-EType number: RK-E
For an IMPCO LPG system on forklift trucks and up to more than 75 kW (100 HP) Engine power Type: IMPCO Model COBRADimensions: Ø11 cm x Width: 11.5 m x Height: 11 cmWeight: 0.9 kgMounting: Using two mounting points / boltsPower: Up to 100 hp (75 kW)
Repair your IMPCO 300A Mixer with this original Repair Kit RK300MA-50/70-2 (Repair Kit). A manual is included. Brand: IMPCOManufacturer code: RK300MA-50/70-2Type number: RK300MA-50/70-2
To facilitate gas starting. Connect to the Test Port of your IMPCO evaporator and Mixer or inlet manifoold. Connect using a Ø6mm gas hose to the nozzle in the inlet path. Briefly actuate with 12V before starting. Type: IMPCO SVDimensions: Ø28 mm x Height: 59 mmWeight: 0.2kgInput: 1/8" NPT MaleOutlet: Ø6.5 mm hose barb
This type of LPG Reducer is the most suitable and most used on American classic cars Type: IMPCO Model E Version EBApproval No: E4 67R-010090 Dimensions: Ø16 cm x Width: 18.5 m x Height: 18.5 cmWeight: 1.9kgMounting: By means of two lateral mounting eyesPosition: In the engine compartment direction like the bicyclesPower: Up to 325 hp (242...
This unit is available for LPG Vapor or Natural Gas for applications with air flow requirements up to 345 CFM (162.8 L/s).
This unit is available for LPG Vapor or Natural Gas for applications with air flow requirements up to 345 CFM (162.8 L/s).
This type of LPG Mixer is the most suitable and most used on American classics with larger engines above 5.0 L from the brands Chevrolet, Ford, Chrysler, Dodge, Cadillac, etc. Use this type of mixer in combination with an IMPCO Model E evaporator for optimal operation.Brand: IMPCOType number: CA300AM-50-2Dimensions: Ø20.5 cm x Height: 11 cmInput:...
This type of LPG Mixer is most suitable for American classics with extra high power from the brands Chevrolet, Ford, Chrysler, Dodge, Cadillac, etc. Use this type of mixer in combination with an IMPCO Model E evaporator for optimal operation. Brand: IMPCOType: IMPCO Model 425 MixerDimensions: Ø14 cm x Height: 14 cmInput Connection: 1" NPT Female