FOR A PROPER MOTOR OF THIS WEBSITE, WE MAKE USE OF COOKIES.
- Temperature Sensors
- Fuel Level Gauge
- Pressure Sensors
Suitable for: - AEB Injector rail AEBINJ I-PLUS 4RS and 2RS- Vogels VGI Injector rail 4 cyl. and 2 cyl.- Aluminum Gas distribution block used in 6 and 8 cyl. systems
For LPG tank content displayTank sensor 0 - 90 Ohm for 4-hole LPG Tank (Ring Tank / Cyl. Tank / Vapor Tank) including wiring. (AEB820 / Schrafima Type L7)Empty = 0 Ohm / Full = 90 Ohm (Not for LPG tank with Multivalve)
This temperature sensor is used to determine the engine temperature (coolant temp.). The signal is used by the GasECU to determine if the temperature of the water / coolant is high enough to run on LPG. Suitable for:- Landi Renzo Omegas- Birds VGI & VDI- Landi LSI
For LPG tank content displayTank sensor 0 - 90 Ohm for MultiValve LPG Tank (Ring Tank / Cyl. Tank) including 5m. wiring.Empty = 0 Ohm / Full = 90 Ohm (Not suitable for 4-hole LPG tank)
Gas pressure sensor and temperature sensor used in the Prins VSI system.Mounted on the gas filter.
For LPG tank content display Livello9-LED content indicator in combination with an optional tank sensor 0 - 90 Ohm for 4-hole LPG Tank (Ring Tank / Cyl. Tank / Vapor Tank) Optional Tank Sensor: 0 - 90 Ohm
This type of LPG switch is used in combination with classic LPG systems in vehicles with a carburettor. The switch is equipped with a push button with which the type of fuel can be selected (Petrol/LPG) and a number of LEDs for the LPG tank capacity indication. The switch also has a built-in safety relay (safety relay)
Pressure & MAP sensor for measuring the Gas pressure and Gas temperature and the pressure in the intake manifold.This type of sensor is mounted in the gas hose. Brand: AEBManufacturer code: 463500000Model number: MP12T-MP01
Pressure & MAP sensor for measuring the Gas pressure and Gas temperature and the pressure in the intake manifold.This type of sensor is mounted in the gas hose. Brand: AEBManufacturer code: 463505000Model number: MP14T-MP01
Gas pressure & MAP sensor for measuring the Gas pressure and Gas temperature and the pressure in the intake manifold.1x Gas pressure connection Ø6mm (for measuring Gas pressure)1x MAP connection Ø6mm (Intake manifold pressure) Brand: AEBType number: AEB025-H01-MP01Manufacturer code: 3613112500019
Gas pressure sensor and temperature sensor used in GI25 gas systems of the LANDI Group. Type number: 5.5 bar T-MAPC97Manufacturer code: 463000027Alternative codes: T-MAPC97 / cod. 100848 5.5 Approval number: 67R-01 0384 - 110R 010279 PAY ATTENTION! Check on a OPEL which type of pressure sensor is being used. (3.5 bar / 5.5 bar).
Gas pressure sensor and temperature sensor used in GI25 gas systems of the LANDI Group. Type number: 3.5 bar T-MAPC96Manufacturer code: 463000026Alternative codes: Bosch 0 281 002 456Approval number: 67R-01 0384 - 110R 010279 PAY ATTENTION! Check on a OPEL which type of pressure sensor is being used. (3.5 bar / 5.5 bar).
Bosch Gas Pressure sensor 3,5 bar & Temp. sensor (Landi Renzo) PAY ATTENTION! Check on a OPEL which type of pressure sensor is being used. (3.5 bar / 5.5 bar).