Compl. IMPCO LPG Kit with 300A Direct on Carb. + Cyl. LPG Tank until 120L

New

Choose your Cylindrical LPG Tank:
 
NB! First check very carefully whether the desired LPG tank fits in your vehicle. Pay attention to the length and diameter of the tank with the gas tight housing on it.
 

PLEASE SPECIFY FOR WHICH TYPE OF VEHICLE (Make, Model, Engine, Year) you are ordering the kit, so that we can verify your order. Do this in the comments field during checkout (Shopping cart).

More details

IN STOCK

1 455,15 € tax incl.

-30%

2 078,78 €

Data sheet

Attention!Have this Product installed by an authorized specialist!
Recommendation:If the tank is fitted underneath the car, apply an undercoating to protect the tank and have a longer lifespan.
Right of WithdrawalWhen connecting (Electric, Gas or coolant) to this product, the right of withdrawal expires.
DownloadsManuals and Documentation - See bottom of this page.
Related ProductsSee bottom of this page
Shipping CostCalculated at Checkout

More info

Complete IMPCO LPG Kit with 300A Mixer direct on Carburettor + Cylindrical LPG Tank until 120L and fixation kit for tank fitting

 

Complete IMPCO LPG Kit with 300A Mixer direct on Carburettor + Cylindrical LPG Tank (Tank size by choice until 120L) and tank fixation kit for tank fitting.

 

IMPCO LPG Conversion Kit: 

This IMPCO LPG Conversion Kit is often used on American classical cars. This kit uses the IMPCO gas mixer CA300 and is placed directly on top of the carburettor using an adapter.
For this type of IMPCO LPG Installation there must be sufficient space between the carburettor and the hood.

(For cars with a bonnet that is too low, choose the IMPCO Front End conversion kit with extension arm that allows the gas mixer to be placed along side the carburettor.)

 

Kit Content:

- LPG Reducer type IMPCO Model E incl. couplings
- LPG Shut-off valve type Valtek 06 with large flow and incl. couplings
- IMPCO Gas mixer Type CA300AM-50-2 + gaskets and choke cable
- Air Filter + Cover and Crank ventilation coupling
- Carburettor Adapter for installation of the gas mixer type CA300AM-50-2 (Choose option)
- IMPCO Gas Hose 1 inch (25mm)
- LPG Switch + LED indicator and internal safety Switch type AEB 722 (Gas Starting Switch, programmable)
- 5 Pin relay to power supply the LPG shut-off valves
- Petrol Shut-off Valve 8mm hose connection
- LPG Thermoplastic Piping 8mm x 6m + couplings
- Petrol hose 8mm internally
- Coolant Hose 15mm
- 2 x Coolant T-pieces
- Small fixation material: Hose clamps, pipe brackets, screws, bolts and nuts etc.
- Cylindrical LPG Tank by choice until 120L
- LPG Tank Fixation Kit including Tank frame and straps, Filling point and hose, Vent hose, screws, bolts and nuts etc.

 

Frequently applied on various models of car makes:

CHEVROLET - FORD - DODGE - CADILLAC - GMC - And Others

 

PLEASE SPECIFY FOR WHICH TYPE OF VEHICLE (Make, Model, Engine, Year) you are ordering the kit, so that we can verify your order. Do this in the comments field during checkout (Shopping cart).
 
Correct Installation!
Have this Product installed by a competent person or specialist company! Apply the LPG safety guidelines for this.

 

TIP! In case of LPG substructure (underslung): Tank and valves should be provided with a protective coating for longer life. Repeat this annually.
 
NB! A Tank Certificate is included with every new LPG Tank. This is usually stuck on the box or on the tank itself. This contains information about, among other things, the approval, production date and serial number. This document is unique and very difficult to obtain again. So keep it very well! You may need it during the inspection of your car. Alternatively, download the 67R-01 approval document for this type of tank at the bottom of this page.
 
Weight: Due to a weight above 30kg, this product can only be sent via a pallet. The shipping costs depend on the delivery destination and the total weight of the order. You can see the shipping costs by placing the product(s) in the shopping cart and specifying the destination.

After you have ordered this product, we will assemble the LPG tank for you, i.e. mount the tank valves, as this is an expert job.
 
Alternatively, it is also possible to collect this product from us near Eindhoven (Son). In this case there are of course no additional transport costs. When picking up, it is necessary that you have first made the order and the online payment with us. Only then will the tank be prepared for you and you will receive a message from us when and where exactly you can come and collect the LPG tank.

Bijbehorende Producten

Download