Thermoplastic High Pressure Pipe 4m with M20 coupling - To connect Vapour Tank to Pressure regulator

Thermoplastic High Pressure Pipe 4 meter + M20 coupling - To connect Vapour Tank to Pressure regulator

This product allows you to make a connection between a Vapour Gas Tank (with an 8mm compression connection) or, for example, from a gas bottle (with a SHELL connection) to a pressure regulator with an M20 connection (GOK / TRUMA / CAVAGNA).
The plastic pipe can be shortened, making it easy to customize. The couplings are easy to connect to the plastic pipe by means of a compression ring and compression nut.
Set consisting of:

- 4 meter Thermoplastic LPG pipe (FARO 8mm), then cut to the desired length.
- 1x Coupling M20 Female to 8mm compression.
- 2x Straight coupling piece Ø8mm for plastic pipe (terminal)
- 1x Angled coupling piece Ø8mm for plastic pipe (terminal)
- 6x Pipe bracket for attaching the pipe to the vehicle.
Optional:
- Adapter for SHELL connection (Left Hand Thread) x 8mm compression on Vapor Tank or Gas Bottle.
- Adapter for Electrical Tank Shut Off Valve on Vapour Tank (Flare 5/16"UNF)

Function & Application:

Connection between vapor tank / gas bottle and pressure regulator with M20 connection. Is suitable for high pressure (tank pressure up to 30 bar) thanks to the high-quality automotive approval ECE 67R-01 class 1.

M20-Connection to pressure regulator:
Suitable for pressure regulators with an ingnag with an external M20 screw thread (Ø20mm). The supplied adapter from M20 to Ø8mm compression makes it possible to connect the pressure regulator to the pipe.

Standard suitable for 8mm compression connection:
This set is standard suitable for an LPG vapor tank with an 8mm compression connection on the output.

WARNING! Tighten all compression fittings well, so that you are sure that no leakage can occur.

WARNING: Due to the lack of hose rupture protection, use while travelling is not permitted.

TIP! Then you always have enough length. The plastic pipe can be shortened to the desired length. Use a good sharp hose cutter or else a cutter for this. Cut the pipe neatly straight.

TIP! Check whether everything is connected leak-free, for example by spraying soapy water on the couplings with a plant sprayer.