LPG Shut Off Valve Valtek Tipo 03 - 6mm connections

LPG Shut Off Valve Valtek Tipo 03 - 6mm connections

Including mounting material, compression fittings and compression rings. This type is suitable for 6mm LPG pipe. Indirect and direct mounting on the inlet of an LPG evaporator. Direct mounting in combination with a coupling piece 2x M10x1.

 
LPG gas valve with integrated and replaceable wet gas filter (for filtering eg sand and iron particles).

Brand: VALTEK
Approval number: E4 67R-010041 - 10R 030268
Inner diameter: Ø4mm
Output connection: Ø6mm compression - (M10x1) internal thread
Input connection: Ø6mm compression - (M10x1) internal thread
Spanner size: 16mm
Electrical connection: AMP Super Seal 2-way 12V 11W
Electrical Specifications: 12 V - 11 Watt
Pressure class: 67R-01 Class 1 (max. 30 bar)
Material: Brass

 
Function & Application: An LPG gas shut-off valve is a safety requirement and serves to shut off the supply of liquid LPG and is placed before the LPG evaporator (end of LPG pipe coming from the LPG tank). This type is suitable for indirect and direct mounting on the inlet of an LPG evaporator. Direct mounting is only possible with coupling piece / piece of LPG pipe.

 
If you want to connect this type of gas valve directly to the inlet of an LPG evaporator, you need a coupling piece 2x M10x1. This makes a connection between the evaporator gas valve.

 
NB!
This type of LPG valve is suitable for 6mm LPG pipe. For cars with high power and 8mm LPG pipe, use a gas valve with a M12x1 8mm inlet.

 
TIP!: Replace the wet gas filter (Integrated filter) at least every 60,000 km to prevent it from becoming clogged and not polluting the gas valve.

 
TIP!: Provide the parts with a protective coating, such as a transparent fabric, so that they are well protected against water and dirt from the outside.