Reduced price! Lovato LPG Filter Replacement Cartridge View larger

Lovato LPG Filter Replacement + O-ring Cartridge

CI-281-2-Z

New

Outer Diameter: 42mm
Height: 52mm
Diameter Hole: 17mm
Filtration: 10 Micron (High quality filter element)

More details

ON STOCK

9,80 € tax incl.

-40%

16,34 €

Data sheet

Application:Evaporated Gas Filtering
Right of WithdrawalThe right of return expires when the transparent packaging is opened.
DownloadsManuals and Documentation - See bottom of this page.
Related ProductsSee bottom of this page
Shipping CostCalculated at Checkout

More info

Lovato LPG Filter Replacement + O-ring Cartridge

Lovato BRC LPG Gaseous Filter - Disposable

High quality filter element

Filtration: 10 Micron (High quality filter element)

Outer Diameter: 42mm

Height: 52mm

Diameter Hole: 17mm

Applicable on gassystems

Lovato Easy Fast

Lovato Smart Easy Fast OBD II

Lovato Easy Fast Direct Injection

------------------------------------------------------------------

Renew your gas filter at least every 20,000 km

This is to prevent contamination of the gas system and gas injectors.

Background information regarding problem with gas injectors:

In most cases the problem is caused by the fact that the injectors are contaminated with paraffin (oils and greases from the LPG). The filter in front of the injectors must ensure that the injectors do not contaminate quickly. This filter will eventually become saturated and must be replaced every 20,000 km. If the filter is not replaced, the paraffin will no longer be trapped and end up in the injectors. It is not the case that the injectors leak or do not open anymore. But the opening and closing time are no longer correct. The injectors remain open longer than they should (with dynamic behavior), which means that too much fuel is being dosed. (too rich mixture) The injectors will then deviate, especially with short injection times (low engine load). The engine is going to run messy and there are too large differences between the injectors. Cleaning the injectors often makes no sense, because there is often too much wear in the injector occurred, as a result of which the guide of the plunger (sealing disk) no longer has the right fit. The plunger does not go smoothly and lord, but goes up and down stumbling and wobbling. If the injectors are replaced without replacing the filter, the new injectors will soon become dirty again. (read symptom control, no long-term solution)

Bijbehorende Producten

Download