FOR A PROPER MOTOR OF THIS WEBSITE, WE MAKE USE OF COOKIES.
New
LPG Tank Frame for LPG cylinder tank mounting (vapor tanks) in combination with lashing straps (tank straps). Suitable for LPG cylinder tanks with a diameter of 27 cm and up to 40 cm and a maximum length of approximately 95 cm. (Tension straps not included)
Dimensions: Width: 28 cm x Length: 85 cm
IN STOCK
Warning: Last items in stock!
Availability date:
LPG Tank Frame 85cm Universal + Insulation Strip - for LPG Cylinder Tanks
LPG Tank Frame for LPG cylinder tank mounting (vapor tanks) in combination with lashing straps (tank straps). Suitable for LPG cylinder tanks with a diameter of 27 cm and up to 40 cm and a maximum length of approximately 95 cm. (Tension straps not included)
Dimensions: Width: 28 cm x Length: 85 cm
Recipient :
* Required fields
or Cancel
Application: | Suitable for in and under the car |
Attention! | Have this Product installed by an authorized specialist! |
Recommendation: | If the tank is fitted underneath the car, apply an undercoating to protect the tank and have a longer lifespan. |
Right of Withdrawal | When connecting (Electric, Gas or coolant) to this product, the right of withdrawal expires. |
Downloads | Manuals and Documentation - See bottom of this page. |
Related Products | See bottom of this page |
Shipping Cost | Calculated at Checkout |
LPG Tank Frame 85 cm for LPG cylinder tank mounting (vapor tanks) in combination with lashing straps (tank straps). Suitable for LPG cylinder tanks with a diameter of 27 cm and up to 40 cm and a maximum length of approximately 95 cm. (Tension straps not included)
Type: Basic Steel LPG Tank Frame standard suitable for 2x lashing strap for cylinder tank mounting
Dimensions: Width: 28 cm x Length: 85 cm
Product Content:
1x Tank frame length 85 cm
2m Plastic Insulation Strip U-profile
Optional: 2x Corner bracket for extra tension strap attachments
Application: A tank frame / tank rack is used in combination with a tension straps / tank straps for installing an LPG cylinder tank (LPG vapor tank) with a tank diameter of 270 mm and up to 400 mm. The welds of the tank must fall within the length of the tank frame. As a rule of thumb, you can determine the length between the welds by subtracting 10 cm from the total tank length.
COATING: The tank frame is untreated. We recommend providing the tank frame with a protective coating after any adjustments, such as the provision of extra mounting holes, mounting brackets and/or a bulkhead.
Lashing strap set incl. mounting material for making 2 lashing straps (Tank straps). For LPG...
23,66 € -15% 27,83 €
Lashing strap set incl. mounting material for making 2 lashing straps (Tank straps). For LPG...
21,60 € -15% 25,41 €
LPG Tank Frame for LPG cylinder tank mounting (vapor tanks) in combination with lashing...
42,30 € -10% 47,00 €
LPG Tank Frame for LPG cylinder tank mounting (vapor tanks) in combination with lashing...
58,50 € -10% 65,00 €